2016 Certification Training & Testing
| Event | |||
|---|---|---|---|
| INSTALLATION CERTIFICATION TRAINING AND TESTING - May 24 - 25, Kennesaw, GA PREREQUISITE: 1. Minimum of 2 years experience in wood flooring installation and 2. Successful completion of Intermediate, Advanced or Expert level Installation Training or NWFA Installation Certification School or approved manufacturer school 3. Must be a member in good standing with National Wood Flooring Association To earn Certified Installation Professional status you must pass an online written test and a hands-on/skills test. Online Test: You must complete and pass the online test prior to the hands-on test. If you fail the online written test, you can apply to retest. The same testing fees apply. Hands-On Test: The hands-on portion of the Installation Certification is designed to demonstrate technical mastery of the following wood flooring installation skills: 1. ENGINEERED WOOD FLOOR GLUE-DOWN OVER CONCRETE SUB-FLOOR 2. SOLID WOOD NAIL-DOWN ON WOOD SUB-FLOOR 3. DRY LAY HERRINGBONE INSTALLATION 4. REPLACE A BOARD IN EXISTING FLOOR 5. INSTALL FLOATING FLOOR OVER CONCRETE SLAB If taking hands-on exam at NWFA training, all tools and supplies will be provided, unless otherwise notified. For more information on certification please contact Sharon Schaller at sharon.schaller@nwfa.org or call 866-418-5408. Receive one CCU upon successful completion of class and testing. SAND & FINISH CERTIFICATION TRAINING & TESTING -June 15 - 16, Portland, Oregon PREREQUISITE: 1. Minimum of 2 years experience in sanding & finishing of wood floors and 2. Successful completion of Intermediate, Advanced or Expert level Sand & Finish Training or NWFA Sand & Finish Certification School or approved manufacturer school 3. Must be a member in good standing with National Wood Flooring Association To earn Certified Sand & Finish Professional status you must pass an online sand & finish written test and a hands-on/skills test. Online Test: You must complete and pass the online test prior to the hands-on test. If you fail the online written test, you can apply to retest. The same testing fees apply. Hands-On Test: The hands-on portion of the Sand & Finish Certification is designed to demonstrate technical mastery of the following wood flooring sand & finish skills: 1. ROUGH SANDING UNFINISHED STRIP FLOORING 2. SANDING AND APPLYING STAIN COAT 3. APPLY SEAL COAT 4. PREPARE AND APPLY FINAL COAT TO PREFINISHED OR PREVIOUSLY FINISHED STRIP FLOOR If taking hands-on exam at NWFA training, all tools and supplies will be provided, unless otherwise notified. For more information on certification please contact Sharon Schaller at sharon.schaller@nwfa.org or call 866-418-5408 Receive one CCU after successfully completing training and testing. | |||
| Event: | 2016 Certification Training & Testing | ||
| Start: | 6/13/2016 | Contact: | NWFA |
| Ends: | 6/16/2016 | Phone: | 800-422-4556 |
| Location: | Cronin and Company | Fax: | |
| Portland, Oregon | Link: | ||
| This item has been viewed 703 times | |||
